Miller Specialty Tool Kit # 9518 Box 5 of 5
Product ID #05-200-045
Miller Specialty Tools to to properly service the NAG1 automatic Transmission in the LX and other vehicles used in Chrysler, Dodge, Plymouth and Jeep vehicles.
Manufacturer: Miller / OTC / Chrysler
Components: 9078, 8266-18, 9082, 9287, 8902A
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 8266-18 Socket
This special tool is used with handle 8266-8 and a Dial Indicator to measure the gear train end play of the NAG1 Automatic Transmission. Services vehicles from 2003 to current model year.
# 8902A Seal Installer
Use this installer to install the Torque Converter Hub Seal and Output Shaft Seal in NAG1 Automatic Transmission. Services vehicles from 2003 to current model year.
# 9078 Staking Tool
Used with the C-4171 Drive Handle to stake the Output Flange Retaining Nuts into position after the proper torque is obtained on vehicles equipped with the NAG1 Automatic Transmission. Services vehicles from 2003 to current model year.
# 9082A Bearing Remover
This special tool is used to remove the Output Shaft Bearing from the NAG1 Automatic Transmission while the Output Shaft is installed. Services vehicles from 2003 to current model year.
#9287 Bearing Installer
Use this special tool to install the output shaft bearing into the NAG1 Automatic Transmission Case. Services vehicles from 2003 to current model year.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 6549
-
Miller Tool 8266A
-
Miller Tool 8392
-
Miller Tool 8666CC
-
Miller Tool 9870
-
Miller Tool 9967 1-2
-
Miller Tool 9967 2-2
-
Miller Tool 9978
-
Miller Tool C-3887-B
