Miller Specialty Tool Kit # 8666CC

Component photos courtesy Miller Tool Company

# 8592 Bearing Installer

Use this special tool with the C-4171 Drive Handle to install the output shaft taper roller bearing into the transfer driven gear bearing retainer in F4A42, F4A51, F5A42, F5A51 automatic transaxles from 2000 through current model year.

Read the IMPORTANT INFORMATION in the right sidebar.

# 8597 Bearing Installer

Use this special tool with the C-4171 Drive Handle to install the output shaft taper roller bearing into the transfer driven gear bearing retainer in F4A42 automatic transaxles from 2000 through 2003 model year.

# 8619 Seal Installer

Install the inner oil seal into the center bearing bracket in 2001 through current model year Sebring and Stratus vehicles. This tool is also used with the 8615 as a support during center bearing removal.

# 8621 Spring Compressor

Use this special spring compressor along with the 8622 Clutch Compressor Screw for measurement of the Reverse Clutch end play in the F4A42, F4A51, F5A42, F5A51 automatic transaxles from 2000 through current model year.

# MB991176 Spring Seat Holder

This special spring seat holder is used to prevent the Strut insulator from turning while removing or installing the retaining nut on ST22 Sebring and Stratus vehicles to 2005 model year.

# MB991603 Guide Plate

Use this special guide plate along with MD998372 and MD998373 to remove and install the rear counter shaft bearing in 2001 model year 2.4 Litre engines.

# MB991628 Spring Compressor

Use this special spring compressor along with the 8622 Clutch Compressor Screw for measurement of the under drive and over drive Clutch end play in the F4A42, F5A42, F5A51 automatic transaxles from 2000 through current model year.

#MB991629 Spring Compressor

Use this special spring compressor along with the 8622 Clutch Compressor Screw for measurement of the under drive and over drive Clutch end play in the F4A51, F5A42, F5A51 automatic transaxles from 2000 through 2005 model year.

# MB991631 Clearance Plates

This special pair of plates must be used to measure the low/reverse and second brake end plays in the F4A42, F5A42, F5A51 automatic transaxles from 2000 through 2005 model year.

# MB991632 Clearance Plates

This special pair of plates must be used to measure the low/reverse and second brake end plays in the F4A51, F5A42, F5A51 automatic transaxles from 2000 through 2005 model year.

# MB991790 Spring Compressor

Use this special spring compressor along with the 8622 Clutch Compressor Screw for measurement of the Reverse Clutch end play in the F4A42, F5A42, F5A51 automatic transaxles from 2000 through 2005 model year.