Miller Specialty Tool Kit # 9978
Product ID #05-200-064
Tools to properly service the .Aisin AS68RC RWD Automatic Transmission.
Manufacturer: Miller / OTC / Chrysler
Components: 8266-19, 8266-20, 9980, 9981, 9984, 9985, 9983, 9982
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 8266-19 End Play Socket
Use this End Play Socket along with the previously shipped 8266A End Play Fixture for checking Input Shsft End Play in AS68RC Transmission.
# 8266-20 End Play Socket
Use this End Play Socket along with the previously shipped 8266A End Play Fixture for checking the 4WD Extension Housing Outout Shsft End Play in AS68RC Transmission.
# 9980 Puller Adapters
Use these Adapters with the C-3752 Slide Hammers to remove the Number One Carrier Assembly on the Aisin AS68RC RWD Transmission.
# 9982 Spring Compressor
This Spring Compressor is used with the 8622 Clutch Spring Compressor Screw to compress the B1 Clutch during service procedures on the Aisin AS68RC RWD Transmission.
# 9983 Transmission Range Selector Alignment Tool
This special tool is used to adjust the Transmission Range Selectorn in the Aisin AS68RC RWD Transmission.
# 9984 Seal Installer
This new installer is used with the C-4171 Drive Handle to install the 4WD Output Shaft Seal to its proper depth in the Aisin AS68RC RWD Transmission.
# 9985 Seal Installer
This new installer is used with the C-4171 Drive Handle to install the 2WD Output Shaft Seal to its proper depth in the Aisin AS68RC RWD Transmission.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 6549
-
Miller Tool 8266A
-
Miller Tool 8392
-
Miller Tool 8666CC
-
Miller Tool 9518-5
-
Miller Tool 9870
-
Miller Tool 9967 1-2
-
Miller Tool 9967 2-2
-
Miller Tool C-3887-B
