Miller Specialty Tool Kit # 9967 Box 2 of 2
Product ID #05-200-063
Tools to properly service the 62TE Automatic Transaxle during overhaul procedures.
Manufacturer: Miller / OTC / Chrysler
Components: 9951, 9741, 9727, 9908, 9738
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9727 Piston Installer
This special tool must be iused to prevent damage while installing the Direct Clutch Balance Piston during service procedures on the 62TE Transaxle.
# 9738 Adapter Blocks
These Adapter Blocks are used in conjunction with the C-293-PA Press and 9678 Plug to remove the Compounder Transfer Gear Bearing in the 62TE Transaxle.
# 9741 Air Pressure Tesing Plate
Use this Air Pressure Testing Plate to diagnose inoperative Clutches in 62TE Transaxles.
# 9908 Puller Adapter
This special Puller Adapter is used with a C-3752 Slide Hammer to remove the Underdrive Compounder Assembly from 62TE Transaxles.
# 9951 Shim Compounder Tool
This special tool is used with the C-3339A Dial Indicator to determine the proper Compounder End Play Shim thickness in 62TE Transaxles.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 6549
-
Miller Tool 8266A
-
Miller Tool 8392
-
Miller Tool 8666CC
-
Miller Tool 9518-5
-
Miller Tool 9870
-
Miller Tool 9967 1-2
-
Miller Tool 9978
-
Miller Tool C-3887-B
