Miller Specialty Tool Kit # 9518 Box 4 of 5

Component photos courtesy Miller Tool Company

Read the IMPORTANT INFORMATION in the right sidebar.

# 9065-3 Valve Spring Adapter

Used with the previously released 9065 Valve Spring Compressor to remove or install the Valve Springs on LX vehicles equpped with the 5.7 Liter Hemi Engine. Included with the 9065A tool.

# 9314 Dust Boot Installer

Used with the C-4171 Drive Handle to install the Dust Boot on the 42mm Rear Cliper or the 42mm Dual Piston Front Caliper on 2005 LX Vehicles.

# 9315 Dust Boot Installer

Used with the C-4171 Drive Handle to install the Dust Boot on the 60mm Single Piston Front Caliper used on 2005 LX Vehicles.

# 9320 Ball Joint Remover and Installer

Use this special tool along with the C-4212F Press to remove and install the Lower Ball Joint on LX vehicles with Rear Wheel Drive.

# 9360 Ball Joint Remover

This special tool is used to separate the Ball Joint Stud from the Lower Control Arms on LX vehicles.

# 9362 Strut Nut Wrench

Use this special tool along with an 8mm Deep Well Socket to remove and install the Front Shock Assembly Retaining Nuts on LX vehicles. This tool is also used on the 2005 Dakota. This tool is also used with tool 9894 on PM49 vehicles.

# 9365 Crankshaft Damper Holding Fixture

Use this tool to hold the Crankshaft Damoer while removing or installing the Crankshaft Damper Retaining Bolt in LX vehicles equipped with the 2.7 or 3.5 Liter Engine. Services vehicles to the current model year.