Miller Specialty Tool Kit # 8887 Box 1 of 2
Product ID #05-200-035
Miller tool kit 8887-1 Front and Rear Differential service tools for American Axles and Dana Axles.
Manufacturer: Miller / OTC / Chrysler
Components: 8963, 8968, 8976, 8977, 8888, 8886, 8960, 8959, 8962, 8961, 8956
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 8886 Bearing Cup Installer
This special tool is used with the C-4171 Drive Handle to install the Rear Pinion Bearing Cup into the housing of the 9 1/4 inch American Axles. Services to current model year vehicles.
# 8888 Differential Bearing Plug
Use this special plug along with the 938 Bridge and 1130 Bearing Splitter to remove the differential bearings from the case on 9 1/4 inch, and 10 1/2 inch American Axles. Services to current model year vehicles.
# 8956 Differential Bearing Installer
Use this bearing installer with the C-4171 Drive Handle to install the Differential Bearings onto the case in the new the 10 1/2 inch American Axles. Services to current model year vehicles.
# 8959 Bearing Cup Installer
This special tool is used with the C-4171 Drive Handle to install the Rear Pinion Bearing Cup into the housing of the 10 1/2 inch American Axles. Services to current model year vehicles.
# 8960 Bearing Cup Installer
This special tool is used with the C-4171 Drive Handle to install the Front Pinion Bearing Cup into the housing of the 10 1/2 inch and 11 1/2 inch American Axles. Services to current model year vehicles.
# 8961 Bearing Cup Installer
This special tool is used with the C-4171 Drive Handle to install the Outer Bearing Cup into the housing of the 10 1/2 inch and 11 1/2 inch American Axles. Services to current model year vehicles.
# 8962 Bearing Cup Installer
This special tool is used with the C-4171 Drive Handle to install the Hub Bearing Cup into the housing of the 10 1/2 inch American Axles. Services to current model year vehicles.
# 8963 Seal Installer
This special tool is used with the C-4171 Drive Handle to install the Hub Seal to its proper depth in the new the 10 1/2 inch and 11 1/2 inch American Axles. Services to current model year vehicles.
# 8968 Bearing Cup Installer
This special tool is used with the C-4171 Drive Handle to install the Rear Pinion Bearing Cup into the housing of the 11 1/2 inch American Axles. Services to current model year vehicles.
# 8976 Pinion Driver
This special tool must be used to prevent damage to the Pinion Shaft of the 9 1/4 inch American Front Axle during removal. This tool is also used to remove the Pinion Sgaft from the new Dana Super 44 226RBI Rear axle. Services to current model year vehicles.
# 8977 Pinion Driver
This special tool must be used to prevent damage to the Pinion Shaft of the 10 1/2 inch and 11 1/2 inch American Axles during removal. Services to current model year vehicles.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 8704CC 1-2
-
Miller Tool 8712CC 1-2
-
Miller Tool 8712CC 2-2
-
Miller Tool 8715CC
-
Miller Tool 9518 2-5
-
Miller Tool 9518 3-5
-
Miller Tool 9518 4-5
