Miller Specialty Tool Kit # 9518 Box 2 of 5
Product ID #05-200-042
Tools to replace rear suspension and differential bushings, plus bench tools for servicing the differentials in the LX and other vehicles with 198 and 210 axles.
Manufacturer: Miller / OTC / Chrysler
Components: 9520, 9631, 9361 (2), 9630
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9361 Sleeve Remover and Installer
This new special tool is used to remove and install the Retaining Sleeve while servicing the Rear Suspension Knuckle or Spring Link on 2005 LX vehicles.
# 9520 Bushing Remover and Installer
This special tool is used to remove and install the Rear Differential Mount Bushings in the Rear Crossmember of 2005 LX vehicles.
# 9630 Differential Case Holding Fixture
This special tool is used in conjunction with a vise to hold the Differential during service procedures on 198 and 210 Rear Axles.
# 9631 Holding Fixture
This special tool is used to the Rotating Torque and mount the 198 and 210 Differential Assemblies in a vise during service procedures.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 8704CC 1-2
-
Miller Tool 8712CC 1-2
-
Miller Tool 8712CC 2-2
-
Miller Tool 8715CC
-
Miller Tool 8887 1-4
-
Miller Tool 9518 3-5
-
Miller Tool 9518 4-5
