Miller Specialty Tool Kit # 8715CC

Component photos courtesy Miller Tool Company

Read the IMPORTANT INFORMATION in the right sidebar.

# 8822A Bleeder Tube Adapters

Use these adapters along with the 8358 Bleeder Tubes during bleeding procedures on the Master Cylinder for the following vehicles; Viper 2000 through current, Minivans with ABS 1996 through current, LH 1998 through current, PL 1994 through current and CS vehicles. The 8822-1 is also used with 8358 and the 9705 Bleeder Tube Adapters on PM 49 vehicles.

# 8825 Pressure Test Adapter

This special adapter is used with the 7700 Pressure Tester for Cooling System Diagnostics on ST22 vehicles.

# 8835 Bushing Remover Installer

Use this special Torsion Bar Bushing Remover and Installer with the 8838 Screw Assembly while servicing the bushings on the DR Trucks with 4 wheel drive. Services 2002 through current model year.

# 8836 Bushing Remover Installer

Use this special Torsion Bar Bushing Remover and Installer with the 8839 Screw Assembly while servicing the lower control arm bushings on the DR Trucks with 2 wheel drive. Services 2002 through current model year.

# 8838 Screw Assembly

This special screw is used with the 8830, and 8860 special tools for various removal and installation procedures. This tool is also used with the 8835 remover and installer on DR Trucks. Services through current model year.

# 8839 Screw Assembly

This special screw is used with the 8836, 8858, and 8862 special tools for various removal and installation procedures. Services through current model year.

# 8840 Oil Slinger Installer

This special tool is used to install the Oil Slinger onto the Front Output Shaft in vehicles equipped with the NV241 Gen II and NV243 Transfer Cases. Also used on the NV144. Services 2002 through current model year.

# 8841 Seal Installer

This input shaft seal installer is used on DR Trucks equipped with the NV241 Gen II and NV243 Transfer Cases. Also used on the NV144, NV271, and NV273. Services 2002 through current model year.

# 8845-1