Miller Specialty Tool Kit # 9518 Box 1 of 5
Product ID #05-200-041
Tools to properly repair and adjust the differential (rear axles) in Chrysler Crossfire, LX and many other vehicles equipped with the 198 and 210 rear axles.
Manufacturer: Miller / OTC / Chrysler
Components: 9083, D-115-2A, 9084, 9523, 9522, 9226, 9227, 9228, 9231A
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9083 Arbor Disc
These specia lArbor Discs are used with 6739,6740,6741, D-115-2A, D-115-3, 9085, and 9524 Dial Indicator to accurately measure Pinion Depth in LX vehicles equipped with a 210 Rear Axle.
# 9084 Pinion Bearing Cup Remover
Use this new special tool along with the C-4171 Drive Handle to remove the Inner Pinion Bearing Cup from 198 and 210 Rear Axles. This tool is also used to remove the inner Pinion Bearing Cup from C200F and C200FE Front Axles. Services 2005 to current model year.
# 9226 Spreader Adapters
These new adapters are used in conjunction with the new W-129-B axle spreader to service the 198 and 210 Rear Axles.
# 9227 Pinion Height Gauge
The new gauge block is used with 6739,6740,6741, D-115-2A, D-115-3, 9085, and 9524 Dial Indicator to accurately measure Pinion Depth in LX vehicles equipped with a 198 Rear Axle.
# 9228 Arbor Discs
These new Arbor Discs are used with the 6739, 6740, 6741, D-115-2A, D-115-3, 9227, and 9524 Dial Indicator to accurately measure Pinion Depth in LX vehicles equipped with 198 RearAxles.
# 9231A Pinion Oil Seal Installer
This special tool is used to install the Pinion Seal to its proper depth on LX vehicles equipped with the 198 and 210 Rear Axles.
# 9522 Bearing Cup Remover and Installer
Use this special tool to remove and install the Differential Bearing Cups in LX vehicles equipped with the 198 and 210 Rear Axles.
# 9523 Bearing Installer
Use this new special tool along with the C-4171 Drive Handle to install the Differential Side Bearings in 198 and 210 Rear Axles.
# D-115-2A Scooter Block
This revised special Scooter Block is used with the 6739,6740,6741, D-115-3, 9083, 9227, 9228,, and 9524 Dial Indicator to accurately measure Pinion Depth in LX vehicles equipped with the 198 and 210 Rear Axles. Also used with the 9524 Dial Indicator, 9534 Gauge Block, and 9538 Arbor Discs to accurately measure Pinion Depth on C200F and C200FE Front Axles and Dana Super 44 226RBI Rear Axles.
NOTE: This tool supercedes the original D-115-2
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9341
-
Miller Tool 9674
-
Miller Tool 9690
-
Miller Tool 9988
-
Miller Tool 10089
-
Miller Tool 10145
-
Miller Tool 10175
