Miller Specialty Tool Kit # 10089
Product ID #05-200-068
Tools to replace the front axle bushings on 186FIA axles. Plus tools to install the Ring Gear on 186FBI rear axles.
Manufacturer: Miller / OTC / Chrysler
Components: 9958, 10126
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9958 Axle Bushings Remover and Installer
This special tool is used with the C-4212F Press to properly remove and install the Pinion Nose, Axle Tube and Axle Bracket Bushings in the 186FIA Front Axle.
# 10126 Ring Gear Remover and Installer
This new tool is used to Remove and Install the 3:21 Ring Gear on the 186FBI Rear Axle on vehicles with the 2.8 Liter CRD with manual transmission.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9341
-
Miller Tool 9518 1-5
-
Miller Tool 9674
-
Miller Tool 9690
-
Miller Tool 9988
-
Miller Tool 10145
-
Miller Tool 10175
