Miller Specialty Tool Kit # 10175
Product ID #05-200-074
Rear axle / differential service tools for All Wheel Drive (AWD).
Manufacturer: Miller / OTC / Chrysler
Components: 10176, 10177, 9523A, 10173, 10174
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9523A Differential Side Bearing Installer
Use with the C-4171 Drive Handle to install the Differential Side Bearings in 198, 200 and 210 Axles.
# 10173 Input Shaft Seal Installer
Used to install the Front Input Shaft Seal on the BW 44-40 transfer case.
# 10174 Rear Output Seal Installer
Used to install the Rear Output Shaft Seal on the BW 44-40 transfer case
# 10176 Front Drive Sprocket Remover
Used to remove the Output Shaft Sprocket on the BW 44-40 transfer case
# 10177 Lockdown Nut
This special tool is used in conjunction with the C-3339A Dial Indicator to lockdown the Clutch Rotator to determine Clutch Pack Clearance and Proper Shim Thickness during service procedures on the BW 44-40 transfer case
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9341
-
Miller Tool 9518 1-5
-
Miller Tool 9674
-
Miller Tool 9690
-
Miller Tool 9988
-
Miller Tool 10089
-
Miller Tool 10145
