Miller Specialty Tool Kit # 9341
Product ID #05-200-040
SRT-10 Pick-Up Truck rear axle service tools.
Manufacturer: Miller / OTC / Chrysler
Components: 9348, 9346, 9347, 9344, 9343
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9343 Axle Oil Seal Installer
This special tool is used with the C-4171 Drive Handle to install the Outer Axle Oil Seal into the axle tube of the 248RBI axles in the new SRT-10 DR Pick-Up Truck.
#9344 Axle Bearing Installer
Use this special tool with the C-4171 Drive Handle to install the Outer Axle Shaft Bearing into the axle tube of the 248RBI axles in the new SRT-10 DR Pick-Up Truck.
# 9346 Fixture
This special tool is used during service procedures of the 248RBI Trak-Loc Axle in the new SRT-10 DR Pick-Up Truck.
# 9347 Bearing Installer
This is used to install bearings in the DR ST10 series trucks. No Details Image available. .
# 9348 Pinion Oil Seal Installer
This special tool installs the Pinion Seal into the 248RBI axles in the new SRT-10 DR Pick-Up Truck.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9518 1-5
-
Miller Tool 9674
-
Miller Tool 9690
-
Miller Tool 9988
-
Miller Tool 10089
-
Miller Tool 10145
-
Miller Tool 10175
