Miller Specialty Tool Kit # 9327
Product ID #05-200-039
Ball joint and Bushing service tools, plus rear Axle service tools on the Chrysler corporate 8 1/4 inch and 9 1/4 inch rear axles on Durango vehicles from 2004 through current model year.
Manufacturer: Miller / OTC / Chrysler
Components: 9333, 9334, 9335, 9337, 9338
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
#9333 Ball Joint Remover and Installer
This special tool is used along with the C-4212F Press to remove and install the Lower Ball Joints on Durango vehicles from 2004 through current model year. This tool is also used with the C-4212F Press to remove and install the Lower Ball Joints on 4 Wheel Drive Dokota vehicles from 1999 through current model year.
#9334 Bushing Remover and Installer
Use this special tool with the C-4212F Press to remove and install the Lower Control Arm Bushings on Durango vehicles from 2004 through current model year.
#9335 Bushing Remover and Installer
Use this special tool with the C-4212F Press to remove and install the Torsion Bar Bushings on Durango vehicles from 2004 through current model year.
#9337 Axle Bearing Installer
Use this special tool with the C-4171 Drive Handle to install the axle bearing and oil seal on corporate 8 1/4 inch and 9 1/4 inch rear axles on Durango vehicles from 2004 through current model year.
#9338 Axle Shaft Bearing Receiver
Use this special tool with the 6310 Puller to remove the axle bearings from the axle tube on corporate 8 1/4 inch and 9 1/4 inch rear axles on Durango vehicles from 2004 through current model year.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 6730
-
Miller Tool 6770
-
Miller Tool 6775
-
Miller Tool 6776
-
Miller Tool 6956
-
Miller Tool 8843
-
Miller Tool 8887 4-4
