Miller Specialty Tool Kit # 8843
Product ID #05-200-033
DR and BR Truck 4 wheel drive front axleservice tools. DR Truck alignment tool.
Manufacturer: Miller / OTC / Chrysler
Components: 8876, 8831, 8834, 8891
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 8831 Bearing Cup Remover
This special tool is used with the C-4171 Drive Handle to remove the Outer Pinion Bearing Cup on the DR Trucks equipped with the CF205 Front Axles.
# 8834 Axle Seal Installer
Use this special tool along with the 5041 and D-163 Seal Installers to install the new style left side inner axle seals in BR and DR trucks equipped with 216FBI Front Axles. Supercedes 8049. Services through 2002 model year.
# 8876 Caster Camber Adjustment
Use these special Caster Camber adjustment tools on DR trucks during the alignment procedures. Covers 2002 to current model year vehicles.
NOTE: Comes in sets of two
# 8891 Seal Installer
Use this special tool to install the pinion seal to its proper depth in BR Trucks equipped with the 248FBI Front axles. Services 2002 through current model year.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 6730
-
Miller Tool 6770
-
Miller Tool 6775
-
Miller Tool 6776
-
Miller Tool 6956
-
Miller Tool 8887 4-4
-
Miller Tool 9327
