Miller Specialty Tool Kit # 6730
Product ID #05-200-020
Miller #6703 is a Master Pinion Depth Kit for Dana and various other axles / differentials.
Manufacturer: Miller / OTC / Chrysler
Components: 6730, 6733, 6735
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 6730 Pinion Gauge Set
Use this pinion depth setting gauge to set to accurately set Dana models 44,60,70,70HD, and 80 axles. Also used on 216FBI, 248FBI, 248RBi, 257RBI, and 285RBI axles. Used with 6770 Master Bearing set. NOTE. Basic components are used on various other axles.
# 6733 Pinion Height Gauge
Use with components from the 6731 Basic Kit and the C-3339A Dial indicator to properly determine pinion height when overhauling the Dana 30 axles.
# 6735 Pinion Height Gauge
Use with components from the 6731 Basic Kit and the C-3339A Dial indicator to properly determine pinion height when overhauling the Dana 35 axles.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 6770
-
Miller Tool 6775
-
Miller Tool 6776
-
Miller Tool 6956
-
Miller Tool 8843
-
Miller Tool 8887 4-4
-
Miller Tool 9327
