Miller Specialty Tool Kit # 8887 Box 4of 4
Product ID #05-200-037
Miller tool kit #8887-4; Special tools to service the 9 1/4 inch and 10 1/2 inch American Axles bearings and seals.
Manufacturer: Miller / OTC / Chrysler
Components: 8882, 8879, 8498, 8681
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 8498 Axle Ahaft Seal Receiver
Use this receiver with the 6310 Remover to remove the Inner Axle Shaft Seals from the 9 1/4 inch American Axle. Services to the current model year.
# 8879 Puller Adapters
These adapter blocks are used with the C-293-PA Puller Press to remove the Pinion Bearing from the shaft in the 9 1/4 inch and 10 1/2 inch American Axles. Services to the current model year.
# 8681 Seal Installer
This special tool is used with the C-4171 Drive Handle to install the Pinion Seal to its proper depth in 186FIA Front Axles. Also used on 216RBI Rear Axles. 2003 to current .
# 8882 Pinion Seal Installer
This Pinion Seal Installer is used with the C-4171 Drive Handle to install the Pinion Seal to its proper depth in the 9 1/4 inch American Axle. Services to the current model year.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 6730
-
Miller Tool 6770
-
Miller Tool 6775
-
Miller Tool 6776
-
Miller Tool 6956
-
Miller Tool 8843
-
Miller Tool 9327
