Miller Specialty Tool Kit # 9765 Box 2 of 2
Product ID #05-200-055
Tools to replace the Lower Control Arm Bushings and Ball Joints in 4X2 and 4x4 Truck models DR 1500 and DH 2500.
Manufacturer: Miller / OTC / Chrysler
Components: 9777, 9772, 9775, 9776
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9772 Bushing Remover and Installer
Use this special tool with the C-4212F Press to remove and install the Lower Control Arm Bushings in 4X4 1500 DR Trucks. NOTE: Cast Arms.
# 9775 Bushing Remover and Installer
Use this special tool with the C-4212F Press to remove and install the Lower Control Arm Bushings in 4X2 1500 DR Trucks. NOTE: Stamped Arms.
# 9776 Reeiver Cup
Use this special tool with the C-4212F Press and 8698-3 Driver to service the Lower Ball Joints in 4X2 2500 DH Trucks. NOTE: Stamped Arms.
# 9777 Busing Remover and Installer
This special tool is used with the C-4212F Press to remove and install the Upper Control Arm Bushings in 2 and 4 Wheel Drive DR 1500 series and 2500 series 2 Wheel Drive DH series trucks.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9600
-
Miller Tool 9750
-
Miller Tool 9787
-
Miller Tool 9895
-
Miller Tool 10105
-
Miller Tool 10139
