Miller Specialty Tool Kit # 9750
Product ID #05-200-054
Rear suspension and Rear Axle tools for the LX SRT8 vehicles.
Manufacturer: Miller / OTC / Chrysler
Components: 9361-UPD, 9754, 9755
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9361UPD Knucle Sleeves Remover and Installer
This tool is used with the 9361 to remove and install the Rear Knuckle Sleeves on the LX SRT8 Rear Suspension Systems.
# 9754 Seal Installer
This special tool is used to install the Pinion Seal to its proper depth in the LX SRT8 vehicles equipped with the 215 Rear Axle.
# 9755 Seal Installer
Use this special tool with the C-4171 Drive Handle to install the Rear Axle Seasl to their proper depth in the LX SRT8 vehicles.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9600
-
Miller Tool 9765 2-2
-
Miller Tool 9787
-
Miller Tool 9895
-
Miller Tool 10105
-
Miller Tool 10139
