Miller Specialty Tool Kit # 10139
Product ID #05-200-072
Tools to replace the suspension bushings and lower ball joints in the 2008 MiniVans.
Manufacturer: Miller / OTC / Chrysler
Components: 10140, 10141
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 10140 Ball Joint Remover and Installer
Use this special tool in conjunction with the C-4212F Press and 6289-3 Remover for Chrysler/Jeep Dealers or 8445-3 for Chrysler/Dodge dealers to remove and install the Lower Ball Joint in 2008 Mini Vans.
# 10141 LCA Bushing Remover and Installer
This special tool is used with the previously released 8839 Screw to Remove and Install the Lower Control Arm Bushings in 2008 Mini Vans.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9600
-
Miller Tool 9750
-
Miller Tool 9765 2-2
-
Miller Tool 9787
-
Miller Tool 9895
-
Miller Tool 10105
