Miller Specialty Tool Kit # 9691 Box 1 of 2
Product ID #05-200-050
Tools to properly service the G238 Manual Transmission during overhaul in the Dodge Ram and ND Trucks.
Manufacturer: Miller / OTC / Chrysler
Components: 9583, 9585, 9625, 9622, 9629, 9586, 9617, 9627, 9667, 9619, 9620, 9584, 9609
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9583 Detent Plug Puller
This special puller is used with the C-3752 Slide Hammer to remove the Large Transmission Detent Plug on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9584 Socket
Use this special socket to remove the Output Shaft Nut on the 4X4 G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9585 Bearing Race Remover
Use this special tool to remove the Countershaft Bearing Race on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9586 Input Shaft Wrench
Use this tool to hold the Transmission Input Shaft on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9609 Bearing Remover
Use this special tool to remove the Shift Rail Bearing on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9617
Use this special tool to remove and install the Countershaft Support Bearing Race on the G238 Manual Transmission in 2005 DR & ND Trucks.
# 9619 Bearing Heat Plug
Use this Heat Plug to install the Main Shaft Bearing on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9620 Seal Installer
Use this special tool with the C-3717 sleeve to install the Input Shaft Seal on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9622 Counter Shaft Plug Installer
Use this special tool to install the Countershaft Plug on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9625 Heat Plug
Use this Heat Plug to install the Countershaft into the Bearing on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9627 Gear Puller
Use this special puller to remove the Second Gear on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9629 Seal Installer
Use this special tool to install the Output Shaft Seal on the G238 Manual Transmission in the 2005 DR and ND Trucks.
# 9667 Seal Remover
This special remover is used with the C-3752 Slide Hammer to remove the Input Shaft Seal on the G238 Manual Transmission in the 2005 DR and ND Trucks.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9691 2-2
-
Miller Tool 9692 1-2
-
Miller Tool 9692 4-4
-
Miller Tool 9898
-
Miller Tool 9960
-
Miller Tool 10017 1-2
-
Miller Tool 10017 2-2
