Miller Specialty Tool Kit # 10017 Box 2 of 2
Product ID #05-200-067
Tools to properly service the T56 and TR6060 Tremec Transmissions during overhaul procedures.<
Manufacturer: Miller / OTC / Chrysler
Components: 10026, 9382, 9366, 10027, 9392, 9377, 10028
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9366 Seal Installer
This special tool is used with the C-4171 Drive Handle to install the Input Shaft Seal to its proper depth in Tremec Transmissions.
# 9377 Press Adapter
This special tool is used with the 1130 Splitter and an Arbor Press to remove the CounterShaft Bearing in both T56 and TR6060 Transmissions. It is also used to install the Main Bearing Shaft in T56 Transmissions.
# 9382 Bridge
These special Bridge is used with the 9378 Bolts, 10027 Press Button, and the 9379 Gear Remover to remove the 5th/6th Gear Assembly in the T56 and 5th Gear in the TR6060 Transmissions.
# 9392 Bearing Cup Installer
This special tool is used with the C-4171 Drive Handle to install the Main Shaft Bearing Cup into the housing of T56 and Tr6060 Transmissions.
# 10026 Synchro Hub Puller
This special tool is used with the 9382 Bridge, 10027 Press Button, and the 9378 Bolts to remove the 5th/6th Gear Synchro Hub from the T56 and TR6060 Transmissions.
# 10027 Press Button
This special tool is used with the 9382 Bridge, and 9378 Bolts to remove 5th, 6th, Reverse Gears and 5-6 Synchro Hub from T56 and TR6060 Transmissions.
# 10028 Bearing Installer
This special tool is used with the C-4171 Drive Handle to install the Shift Rail Bearings into TR6060 Tremec Transmissions.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9691 1-2
-
Miller Tool 9691 2-2
-
Miller Tool 9692 1-4
-
Miller Tool 9692 4-4
-
Miller Tool 9898
-
Miller Tool 9960
-
Miller Tool 10017 1-2
