Miller Specialty Tool Kit # 10017 Box 1 of 2
Product ID #05-200-066
Tools to properly service the T56 and TR6060 Tremec Transmissions during overhaul procedures.
Manufacturer: Miller / OTC / Chrysler
Components: 10018, 9378, 9394, 9379, 9369, 9373, 9380
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9369 Bearing Cup Remover
This special tool is used with the C-4171 Drive Handle to remove the Input and Output Shaft Bearing Cups from the Transmission Case in Tremec Transmissions.
# 9373 Bearing Cup Installer
This special tool is used with the C-4171 Drive Handle to install the Input and Output Shaft Bearing Cups into the Transmission Case in Tremec Transmissions.
# 9378 Puller Bolts
These special Puller Bolts are used with the 9382 Bridge, 10027 Press Button, and the 9379 Gear Remover to remove the 5th/6th Gear Assembly in the Tr6060 and 5th Gear in the T56 Transmissions.
# 9379 Gear Remover
These specialGear Remover is used with the 9382 Bridge, 10027 Press Button, and the 9378 Bolts to remove the 5th/6th Gear Assembly in the Tr6060 and 5th Gear in the T56 Transmissions.
# 9380 Bearing Cup Installer
This special tool is used with the C-4171 Drive Handle to install the Input Shaft Bearing Cup into the Input Shaft in Tremec Transmissions.
# 9394 Bearing Installer
This special tool is used with the C-4171 Drive Handle to install the Countershaft Bearing into the Extension Housing of T56 and Tremec Transmissions.
#10018 Clutch Alignment Tool
Use this tool to properly align the Dual Clutch Discs in Tremec TR6060 Transmissions during service procedures.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9691 1-2
-
Miller Tool 9691 2-2
-
Miller Tool 9692 1-4
-
Miller Tool 9692 4-4
-
Miller Tool 9898
-
Miller Tool 9960
-
Miller Tool 10017 2-2
