Miller Specialty Tool Kit # 8887 Box 2 of 4

Component photos courtesy Miller Tool Company

Read the IMPORTANT INFORMATION in the right sidebar.

 

# 6825A Power Steering Adapter

Use this special adapter in conjuction with the 6815 Poweer Steering Analyzer and the 6826 adapter for Power Steering diagnostics on DR Trucks. Services to current model year vehicles.

# 8975 Ball Joint Remover and Installer

This adapter set is used with the C-4212F Press, 8445, and 6761 to remove and install both upper and lower ball joints in DR Heavy Duty Trucks. Services to current model year vehicles.

# 8985 Socket

This special socket is used to loosen and tight the Race Locknut Set Screw during service procedures on the new steering gear on the DR Heavy Duty Trucks. Services 2003 to current model year vehicles.

# 8986 Oil Seal Protector

Use this special tool with the 8987 Seal Installer to protect the Input Shaft Seal during installation on the DR Heavy Duty Trucks. Services 2003 to current model year vehicles.

# 8987 Seal Installer

Use this special tool with the 8986 Oil Seal Protector to install the Input Shaft Seal on the DR Heavy Duty Trucks. Services 2003 to current model year vehicles.

# 8988 Locknut Wrench

This special tool is used to remove and install the Power Steering Gear Race Nut during overhaul procedures on the DR Heavy Duty Trucks. Services 2003 to current model year vehicles.

# 8989 Seal Installer

Use this special tool with the C-4171 Drive Handle to install the Sector Shaft Seal into the gear box on DR Heavy Duty Trucks. Services 2003 to current model year vehicles.

# 8990 Seal Remover

This special tool is used with the C-3752 Slide Hammer to remove the Pitman Shaft and Steering Gear Seals from the housing in DR Heavy Duty Trucks. Services 2003 to current model year vehicles.

# 8993 Oil Seal Protector

Use this special tool with the 8989 Seal Installer to install the Sector Shaft Seal to its proper depth in the DR Heavy Duty Trucks. Services 2003 to current model year vehicles.