Miller Specialty Tool Kit # 10100
Product ID #05-200-069
Inner Tie Rod End Wrench for Dodge Ram and D1 trucks. Plus Transfer Case seal installers.
Manufacturer: Miller / OTC / Chrysler
Components: 10087-3, 10117,10118
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 10087-3 Inner Tie Rod Wrench
This tool is used with the 10087-2 Wrench to Remove and Install the Inner Tie Rod Ends on Dodge Ram and D1 Trucks.
# 10117 Seal Installer
Use this special tool to iinstall the Front Output Oil Seal in the MP3010 Transfer Case.
# 10118 Input Shaft Oil Seal Installer
Use this special tool with the C-4171 Drive Handle to install the Input Shaft Oil Seal into NV233 and Nv140 Transfer Cases.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 6815
-
Miller Tool 8887-2
