ScanMaster ELM Automotive Diagnostic Software

Automatic OBD Protocol selection:

ISO15765-4 (CAN)
ISO14230-4 (KWP2000)
ISO9141-2
J1850 VPW
J1850 PWM

Communications:

 Fast reliable communicatios with host controllers
  Offers data access improvements on slow protocols
  Posts battery voltage
  Auto identifies PCM and BCM controllers
  Posts Vehicle Identification Number (VIN), Calibration Identification Number (CID), Calibration Verification Number (CVN) when broadcast
  Auto populates vehicle supported PIDs

Functions:
 Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
  Clear trouble codes and turn off the MIL ("Check Engine" light)
  Read & Clear Diagnostic Montiors
  Read & Clear Freeze Frame Data
  Generate Multiple Page Reports
  Data graphing and logging (user selectable PIDs)
  Continuous and Non-Continuous Oxygen Sensor test results
  Display current sensor data, including:
  Engine RPM
  Calculated Load Value (CLV)
  Coolant Temperature (CTS)
  Vehicle Speed (VSS)
  Short Term Fuel Trim (STFT)
  Long Term Fuel Trim (LTFT)
  Intake Manifold Pressure (MAP)
  Timing Advance / Retard
  Intake Air Temperature (IAT)
  Air Flow Rate (MAF)
  Absolute Throttle Position (TPS)
  Oxygen sensor voltages (HO2S)
  Fuel System status (Open / Close Loop)
  Fuel Pressure, and lots more

Recommended Scan Tools

 2X80S-USB Scan Tool

 2X80S-Blu Scan Tool

Additional Info:

Unfortunately software has a "no refund" policy.

Electronic delivery, no shipping.