OBD 2007 Automotive Diagnostic Software

Automatic OBD Protocol selection:

ISO15765-4 (CAN)
ISO14230-4 (KWP2000)
ISO9141-2
J1850 VPW
J1850 PWM

Communications:

 Automatic discovery of correct com port and factory set baud rate of scan tool
  Incremental adjustment of tool IC timeout value to maximize sensor response speed
  Offers data access improvements on slow protocols
  Support for high speed baud rates up to 2.0Mbps
  Auto populates vehicle supported PIDs
  Supports up to 90 PIDs (real time)
  Version check with company server for program version updates and integrated download of new versions

Functions:
  Posts Vehicle Identification Number (VIN), Calibration Identification Number (CID), Calibration Verification Number (CVN) when broadcast
  Read diagnostic trouble codes, both generic and manufacturer-specific
  Clear trouble codes and turn off the MIL ("Check Engine" light)
  Read & Clear Diagnostic Montiors
  Read & Clear Freeze Frame Data
  Generate Multiple Page Reports
  Data graphing and logging (user selectable PIDs)
  Continuous and Non-Continuous Oxygen Sensor test results
  Display current sensor data (current, minimum, maximum and average values), including:
  Engine RPM
  Calculated Load Value (CLV)
  Coolant Temperature (CTS)
  Vehicle Speed (VSS)
  Short Term Fuel Trim (STFT)
  Long Term Fuel Trim (LTFT)
  Intake Manifold Pressure (MAP)
  Timing Advance / Retard
  Intake Air Temperature (IAT)
  Air Flow Rate (MAF)
  Absolute Throttle Position (TPS)
  Oxygen sensor voltages (HO2S)
  Fuel System status (Open / Close Loop)
  Fuel Pressure
  Fully incorporated help manual , and lots more

Recommended Scan Tools

 2X80S-USB Scan Tool

 2X80S-Blu Scan Tool