Miller Specialty Tool Kit # 9610
Product ID #05-200-047
Service tools to properly service the new 1.8, 2.0 and 2.4 Liter Engines manufactured for all world markets.
Manufacturer: Miller / OTC / Chrysler
Components: 9506, 9509, 9701, 9703, 9704, 9706, 9707, 9711
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9506 Oil Seal Installer
Use this special tool in conjunction with the Crankshaft Damper Bolt to install the Front Crankshaft Seal to its proper depth in 1.8, 2.0 and 2.4 Liter Engines manufactured for all world markets.
# 9509 Oil Seal Installer
Use this special tool along with the 9706 Rear Crankshaft Seal Installer and the C-4171 Drive Handle to install the Rear Main Seal to its proper depth in 1.8, 2.0 and 2.4 Liter Engines manufactured for all world markets.
# 9701 Locking Wedge
This special tool is used to lock the Timing Chain Tensioner during service procedures on the 3 new World Engines.
# 9703 Tensioner Pin
This special tool is used to relieve Chain Tension during "In Vehicle" service of the Oil Pump in the new 2.0 and 2.4 Liter Engines manufactured for all world markets.
# 9704 Engine Lifting Fixture
Use this adapter in conjunction with the 6135 Engine Dolly and the 9710A adapter to remove and install the power train in 2007 PM49 Caliber vehicles equipped with the new 1.8, 2.0 and 2.4 Liter Engines manufactured for all world markets.
# 9706 Rear Main Seal Installer
Use this special tool with the 9509 Rear Crankshaft Seal Guide and the C-4171 Drive Handle to install the Rear Main Seal to its proper depth in 1.8, 2.0 and 2.4 Liter Engines manufactured for all world markets.
# 9707 Vibration Damper Holder
This special tool is used with a Breaker Bar to hold the Vibration Damper during removal and installation on all the 3 new World Engines.
# 9711 Oil Pump Sprocket Holding Fixture
Use this special tool to hold the Oil Pump Sprocket during service procedures on the new 1.8 Liter World Engine.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9691 2-2
-
Miller Tool 8848
-
Miller Tool 8999
